Testing and Tagging

Requirements for electrical equipment.

Please scroll to the bottom of the page for contacts and links

Do you need to comply?

Yes – under the provisions of the Occupational Health and Safety Act 2004 (Vic.).

Conditions of compliance

Electrical Safety Standard: AS/NZS 3760 2010 requires that all electrical equipment is tested prior to initial use as well as after servicing and repairs, and periodically from then on.

If you have to comply, what do you have to do?

Portable electrical equipment, including flexible electrical cords, needs to be regularly inspected for wear and mechanical damage, and periodically tested for earth continuity and insulation resistance. Procedures for testing of electrical leads, tools and equipment and the frequency of these tests can be found in AS/NZS 3760 2010 and AS/NZS 3012 2010 Electrical installations – Construction and demolition sites.

AS/NZS 37602010 has a schedule which outlines the frequency of the testing regime for particular plant and equipment. Schools are advised to use this schedule as guide for determining the inspection frequency.

What are the consequences if you don’t comply?

For every school to fulfill its duty of care obligations under the Occupational Health and Safety Act 2004 (Vic.) to provide a safe and healthy workplace, the requirements of AS/NZS 3760 2010 should, as a matter of best practice, be implemented. The Victorian WorkCover Authority sees compliance as integral to fulfilling that duty of care.

Who will help you?

Independent Schools Victoria contact:

Peter Roberts
Director, School Services
Ph. 03 9825 7211
peter.roberts@is.vic.edu.au

Kieren Noonan
School Services Advisor
Ph. 03 9825 7275
kieren.noonan@is.vic.edu.au

Links and Resources

External linkVic DET: Health, Safety and WorkSafe – Electrical Safety

External linkVic DET: School Policy and Advisory Guide – Electrical Equipment Safety

External linkEnergy Safe Victoria: Regular Checking of Electrical Equipment

External linkStandards Australia